Data sheets
ALAMID® 6 GF 25 HV SCHWARZ-9957
PA 6 + 25% glass fibres, high viscosity, adapted for extrusion
ALAMID® 6 GF 30
PA 6 + 30% glass fibres, standard-type injection mold
ALAMID® 6 GF 30 PU D SCHWARZ-17018
PA 6 + 30% glass fibres, detectable, heat stabilized
ALAMID® 6 GK 30
PA 6 + 30% glass beads, standard-type injection molding, distortion low
ALAMID® 6 GK 50
PA 6 + 50% glass beads, stabilized
ALAMID® 6 HV MOD UNGEFÄRBT-9753
PA 6, modified
ALAMID® 6 HZ 4
PA 6 non-fortified, high impact modified
ALAMID® 6 S
PA 6 non-fortified, standard-type injection molding
ALAMID® 6 VO
PA 6 non-fortified, flame retardant, dyeable
ALAMID® 6.6 CF 40 SCHWARZ-9908
PA 6.6 + 40% carbon fibres
ALAMID® 6.6 GF 30
PA 6.6 + 30% glass fibres, standard-type injection molding
ALAMID® 6.6 GF 30 H
PA 6.6 + 30% glass fibres, heat stabilized
ALAMID® 6.6 GF 30 MOD WL SCHWARZ-9665
PA 6.6 + 30% glass fibres, modified, thermally conductive
ALAMID® 6.6 GK 30
PA 6.6 + 30% glass beads, standard-type injection molding
ALAMID® 6.6 GK 50
PA 6.6 + 50% glass beads, standard-type injection molding, distortion low
ALAMID® 6.6 MF 40
PA 6.6 + 40% mineral fibres, stabilized, low shrinkage
ALAMID® 6.6 MOD UNGEFÄRBT-8300
PA 6.6 + 15% carbon fibres, modified
ALAMID® 6.6 PTFE 30
PA 6.6 + 30% PTFE, for tribological applications
ALAMID® 6.6 S NATUR-9142
PA 6 non-fortified, standard-type injection molding
Further ALAMID® data sheets are available on request.
Material safety data sheets | processing guidelines
Material safety data sheets as well as processing guidelines of our ALAMID® products are available on request.
